Capabilities

Industrial Electrical Capabilities

Clean Rooms

Electrical work inside live ISO-classified clean rooms.

We work to your protocol, not ours: gowning, tool wipe-down, controlled material entry and tight turnover dates. That includes stainless disconnects, fume-hood power, lighting and equipment connections. We’ve worked in ISO 5, 6 and 7 clean rooms.

See our clean room project

SCIF and secure facility electrical work in New Jersey

Secure-space electrical for facilities that stay in operation.

GEM Electrical Contracting is a licensed New Jersey electrical contractor based in Clifton. We build SCIFs and other secure spaces inside existing facilities, around ongoing operations. Every crew is foreman-led, and our work is scheduled around your production, security and access rules, including nights and weekends, so the facility keeps running.

SCIFs used to be built almost only for government agencies. Today more private companies, including AI and research companies, build them as well, usually to support classified government work.

As AI expands, we expect more private businesses, not just government agencies and critical industries, to need SCIF-grade secure rooms to protect their AI models, data and research from intrusion.

What GEM does on a SCIF or secure space

  • Power distribution, panels and lighting inside the secure perimeter.
  • Power line filters, procured and installed as the project requires.
  • Dielectric breaks on conduit, as the project requires.
  • Conduit rough-in.
  • Coordination with the owner’s team, the security officer or whoever else the project needs.

Questions about secure-space electrical work: info@gem-electricalcontracting.com · (973) 446-6200

SCIF electrical FAQs

Who does electrical work for SCIFs in New Jersey?

GEM Electrical Contracting, based in Clifton, NJ, builds SCIFs and secure spaces inside existing facilities, around ongoing operations. GEM is a licensed New Jersey electrical contractor (NJ Electrical Contractor License #15653), and every crew is foreman-led.

What electrical work does a SCIF need?

On SCIF and secure-space projects in New Jersey, GEM Electrical Contracting installs the power distribution, panels and lighting inside the secure perimeter and does the conduit rough-in. GEM adds dielectric breaks on conduit as required and procures and installs power line filters as the project requires. GEM coordinates with the owner’s team, the security officer or whoever else the project needs.

Do private companies need SCIFs?

Some do. A private company needs a SCIF when it performs classified work for a government sponsor, and that sponsor sets the construction and accreditation requirements. More AI and research companies now build them for that reason. As AI expands, GEM Electrical Contracting expects more private businesses, not just government agencies and critical industries, to need SCIF-grade secure rooms to protect their AI models, data and research from intrusion.

Can a SCIF be built inside an operating building?

Yes. GEM builds SCIFs inside existing facilities, around ongoing operations, and schedules disruptive work for nights and weekends when needed.

Hazardous Locations

Class I Div 1 and Div 2 installs for chemical and process plants.

Explosion-proof lighting, sealed conduit and rated equipment in tank farms and process areas. Recent example: Class 1 Div 1 LED fixtures with a custom-fabricated support brace for an outdoor tank area. Our own EE-rated scissor lift is built for hazardous and specially rated spaces.

Controls, PLC & Panel Work

Your install crew, standing or overflow.

Integrators bring the design and programming. GEM brings licensed NJ electricians for panel setting, conduit, field wiring, terminations and loop-check support, and we already hold approved-vendor status at regulated NJ pharma, chemical and medical device plants. After-hours backup is available when production is on the line.

Book a 15-minute walk-through

NFPA 70B, Infrared & Arc Flash

Stay ahead of NFPA 70B, now that it’s a standard and not a recommendation.

GEM delivers complete NFPA 70B programs: infrared surveys by certified thermographers, arc flash studies stamped by a licensed New Jersey Professional Engineer, and the corrective work, all under one contract and one point of contact. Our crews open and prep the gear (about 50 pieces in one morning on a recent job), correct the findings and install arc-flash labels. We also handle transformer and panel replacements, scheduled around production.

Draw-out power circuit breaker in an open switchgear section
Close-up of switchgear bus bars and supports

Learn about NFPA 70B maintenance

After-Hours Backup Service

Backup for your maintenance team, when it matters.

When a panel, boiler control or production circuit goes down off-shift, our crew backs up your in-house electricians. Night and weekend panel swaps are scheduled so production never stops. We own a 40-foot bucket truck and seven interior scissor lifts, including an EE-rated lift for hazardous and specially rated spaces, so there’s no waiting on a rental. We serve plants across North and Central New Jersey: Bergen, Hudson, Passaic, Essex, Middlesex, Morris, Somerset and Union counties. Call (973) 446-6200.

High-bay LED lighting across a large distribution center
GEM Electrical Contracting van and scissor lift inside a high-bay distribution center
Industrial boiler burner and controls in a plant boiler room

Call (973) 446-6200

Frequently asked questions

What electrical services does an industrial electrical contractor in New Jersey offer regulated plants?

GEM does electrical work inside live ISO-classified clean rooms, Class I Div 1 and Div 2 hazardous location installs, automation install support for controls integrators, NFPA 70B infrared and arc-flash programs, and after-hours backup service. We also build SCIFs inside existing facilities, around ongoing operations.

How do electricians work inside a live ISO clean room without contaminating it?

GEM works to the plant’s protocol, not ours: gowning, tool wipe-down, controlled material entry and tight turnover dates. Clean room work includes stainless disconnects, fume-hood power, lighting and equipment connections. GEM has worked in ISO 5, 6 and 7 clean rooms.

Who installs explosion-proof lighting in Class I Div 1 areas in New Jersey?

GEM installs explosion-proof lighting, sealed conduit and rated equipment in tank farms and process areas. A recent example was Class 1 Div 1 LED fixtures with a custom-fabricated support brace for an outdoor tank area.

Can an electrical contractor prep switchgear for an infrared survey?

Yes. On a recent job, GEM opened and prepped about 50 pieces of equipment for an infrared survey in one morning. We then correct the findings and install arc-flash labels. The surveys are done by certified thermographers and the arc flash studies are stamped by a licensed NJ PE, all under one GEM contract and one point of contact.

Who can back up our in-house plant electricians after hours in NJ?

When a panel, boiler control or production circuit goes down off-shift, GEM’s crew backs up your in-house electricians. Night and weekend panel swaps are scheduled so production never stops. Call (973) 446-6200. We serve plants across North and Central New Jersey: Bergen, Hudson, Passaic, Essex, Middlesex, Morris, Somerset and Union counties.